Apprentice Training, structural & framing

Cold-Formed Steel Box Header with Clip Angles

600S162 structural studs (54 mil), 14-ga clip angles, #10 hex screws

Time: 1 h 50 min
People: One
Level

Before you start

Clear 3.5 × 3 m of floor and lay out the parts.
21 parts and 92 fasteners in 6 steps.
You'll want a screwdrivers and a tape measure and a drill and a spirit level.
Wear cut-resistant leather gloves; sheared cold-formed steel sheet edges produce severe lacerations.
Do not strip out thin screw heads by running screw guns at excessive RPM with worn bits.

Apprentice Training & Risk NoticeEducational training demonstration only. Risk: Real-world structural lumber sizing, spans, and fastener schedules carry legal liability and must comply with local building codes (IRC/IBC/OSHA) and certified engineering.

Apprentice Training, structural & framing

Cold-Formed Steel Box Header with Clip Angles

600S162 structural studs (54 mil), 14-ga clip angles, #10 hex screws

Time: 1 h 50 min
People: One
Level

Before you start

Clear 3.5 × 3 m of floor and lay out the parts.
21 parts and 92 fasteners in 6 steps.
You'll want a screwdrivers and a tape measure and a drill and a spirit level.
Wear cut-resistant leather gloves; sheared cold-formed steel sheet edges produce severe lacerations.
Do not strip out thin screw heads by running screw guns at excessive RPM with worn bits.